AromaTech Air stream single 제품 설명서 - 페이지 9
{카테고리_이름} AromaTech Air stream single에 대한 제품 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AromaTech Air stream single 9 페이지.
페이지 인쇄EQUIPMENT CLEANING
Machine cleaning:
1.When changing oil clean out the diffuser.
2. If scent diffusion becomes weak.
Cleaning steps:
1. Empty the oil from a canister and replace with 50-100 ml of rubbing alcohol.
2. Screw the bottle into the diffuser and turn the machine ON for 5-10 min to clean out the
diffuser head and tube.
3. Pour out the rubbing alcohol (no rinsing required) and replace with your favorite aroma
oil blend.
Tips:
You can start using the scent machine immediately after cleaning it. There is no need to
wash the tube.
WARNING
If the screen crashes, press ENT and hold for 5 seconds to reset the machine and bring it to
factory settings.
After installation make sure the diffuser, bottle and pump box are ALWAYS vertical and not
tilted or on its side.
-16-
Prior to submitting a warranty claim please try the below steps to
diagnose the problem and fix the the issue. For warranty information
please contact AromaTech at 1888.276.6245 or send us an email at
Problem
-Check if the power is ON or OFF.
-The pump is damaged and needs replacing.
No diffusion
-Air tube is loose and needs to be reconnected.
-Atomization head is blocked. Clean with alcohol.
-Diffuser core with straw is missing or damaged. Replace
Little or no
with a new one.
spray coming out
-Pump is damaged and may need replacing.
-Check the air tube, if loose reconnect it.
-Diffuser core is damaged. Replace diffuser core.
Diffuser spraying liquid
-Machine is tilted or angled. Make sure it's upright at all
times.
-Bottle is loose. Screw it in properly and straight.
Oil Spillage
Abnormal sound
-Pump is loose or damaged. Tighten the pump or replace.
-Make sure the power is ON.
-Check the plug for damage. Try another outlet. If plug is
No display on screen
damaged replace.
-Display screen is damaged. Replace.
Solution
-17-