Arometrix FRACTION FINDER 사용자 설명서 - 페이지 8

{카테고리_이름} Arometrix FRACTION FINDER에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Arometrix FRACTION FINDER 17 페이지.

Click "Default" to return back to manufacturer default. Next to the "Default" button, you will see a

molecule dropdown. When you press the Molecule Indicator dropdown, you will see different molecule

tracking options. You can select any of them, or set your own "Custom" molecule and region. See below.

Set Integration Time

This is meant to enable "AID (Auto)" by clicking the checkbox in the bottom-left corner of the screen. Auto

integration ensures that the signal from the spectrometer is maximized. It is not recommended to

manually tune Integration Time, but it is feasible. See Appendix for more information on manual tuning.

Set Scans to Average

This sets how many optical readings the sensor takes before plotting and displaying a result. More

readings that are averaged imply less noise, but less information. Arometrix recommends that you select 5.

Clock Settings

This should be set during initial acquisition. Set the Date Settings and the Time Settings. Then, Submit.

System Data

This will display "Bytes Available", "Bytes Used", and "Bytes Total". It will also show you % memory used,

and give you an option to "Clear Data".

Section 6: General Procedure for Short-Path Distillation

The Arometrix system was designed initially for short path distillation. Thus, the general procedure in this

standard user manual focuses on how to operate the system for this specific application. If you are using

the system for another application, please refer to our Application Notes on arometrix.com/resources.

Arometrix, Inc.

arometrix.com/resources