3D Shape Engineering Motorized Camera Slider v1 문서 및 지침 - 페이지 4

{카테고리_이름} 3D Shape Engineering Motorized Camera Slider v1에 대한 문서 및 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. 3D Shape Engineering Motorized Camera Slider v1 7 페이지.

페이지 인쇄

3D Shape Engineering Motorized Camera Slider

Documentation & Instructions

*18650 Batteries and Battery Charger are not included.

Practicing Battery Safety

All v1.0b Slider Electronic Modules will shut off motor movement when the battery

has been drained to the point where the display reads "LOW 0%". Once your battery

has reached this state of discharge, remove it and charge it immediately.

Discharging lithium batteries below a certain voltage can cause damage to the cells

and / or a risk of fire due to the cells becoming unstable.

Attaching a camera / cell phone / recording device to the slider plate.

The slider plate features a standard ¼"-20 bolt. We highly recommend purchasing a

tripod head (not included) to attach to the slider plate, making camera angle

adjustments easy. The slider plate can handle up to 5-6 lbs of weight, depending on

the angle the slider is running on. If the motor is bucking (struggling to move,

making odd noises), the load is too heavy. The slider is designed to handle the load of

a DSLR with a decent sized zoom lens with a decent sized aluminum ball head.

Some tripod heads require a ⅜" threaded bolt to attach, in this case you will need to

purchase a ¼"-20 to ⅜" converter.

3dshapeengineering.com