ARP Fridge Defend 사용자 설명서 - 페이지 4

{카테고리_이름} ARP Fridge Defend에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ARP Fridge Defend 10 페이지. V5 + fan control
ARP Fridge Defend에 대해서도 마찬가지입니다: 사용자 지침 (17 페이지)

페이지 인쇄

ARP Control v5.x

INTRODUCTION

To control digital equipment such as cell phones, there is a sequence of button selections and

resulting information displayed. The Fridge Defend is no different, thus, as with all digital

equipment a user guide is necessary for proper setup and operation.

The following user guide gives a brief graphical description of how to operate the ARP Control.

This document shall be considered as a cheat sheet because only a brief description of each

function is given. This is not an inclusive operator's manual. The operator of the ARP Control

shall understand all information provided in this guide in addition to the Installation Guide and

the Troubleshooting Guide. Please see aforesaid guides for important safety information.

IEC TYPE ACCESSORY SAFETY CONTROL

Dometic and Norcold absorption refrigerators are driven by a fired boiler. It is considered good

engineering practice to monitor fired boilers for thermal run away conditions with a safety

controller. The patented Fridge Defend is an accessory IEC type safety controller that uses

standards, including applicable ( and practical ) IEC 60730 automatic electrical control checks,

combined with functional self-tests to provide an economical, yet functional, safety control.

__________________________________________________________________________________________

FAN CONTROL & NON-FAN CONTROL

This user manual covers two types of control as follows:

ARP v5.0 is the basic version without fan set-point control. The cooling unit boiler protection

operates the same as all previous controls.

ARP v5.1 is the same as the basic version with the addition of fan set-point control. This

version of control has added function of turning on/off one or more 12VDC fans to help the

cooling unit move heat away from the fridge and defrost/circulate air within fridge.

__________________________________________________________________________________________

BUTTON FUNCTION

The following terms are used in the text to indicate how to make changes to the ARP control

using the push buttons:

Momentarily Press: This indicates that the operator depresses the button and then

immediately releases in order to make a change.

Press and Hold: This indicates that the operator holds the button until a change occurs, once

the change takes effect, release the button.