Acoustic LS6 사용자 설명서 - 페이지 4

{카테고리_이름} Acoustic LS6에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Acoustic LS6 8 페이지. Loop switch

1. ¼" Output sends the signal from the LS6 to a connected amplifier or other

device with a ¼" input connection

2. 6x ¼" Send and Return effect loops for inserting individual effects or chains of

effect units

3. DC In power jack to connect a 9V negative tip power supply that provides at

least 300mA of current (9V adapter is not included)

4. ¼" Tuner Out sends the unaffected signal from the LS6 to an external tuner,

outside the signal chain

5. ¼" instrument Input for connecting your instrument

6. The LED display will show the operating mode of the LS6 (Live or Program) as

well as the current bank and preset number. It will also display the on-board

tuner function.

7. The Live/Program button allows you to switch between the two operation

modes of the LS6

• In Live mode each footswitch labeled 1-6 will turn on or off the effect loop of

the same number. In this mode the LED ring around each footswitch from

1-6 will also light up to indicate that the chosen effect loop is active.

• In Program mode (the default mode of the LS6) you can save and recall up

to 36 loop configurations in 6 banks, allowing you to engage or disengage

multiple effect loops of your choice with one press of a footswitch.

LS6 Loop Switch User Manual