Arrakis Systems ARC-MIC-PRE 매뉴얼 - 페이지 3
{카테고리_이름} Arrakis Systems ARC-MIC-PRE에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Arrakis Systems ARC-MIC-PRE 4 페이지.
페이지 인쇄Mic Out
Mic IN
Pinout
Pin 1 – Left +
Pin 2 – Left -
Pin 3 – Right +
Pin 4 – Audio Ground
Pin 5 – NC
Pin 6 – Right -
Pin 7 – NC
Pin 8 - NC
LOGIC
There is no logic wiring for the ARC-MIC-PRE. Which means that these ARC-MIC-PRE mic
channels will not mute the audio monitor speakers or turn on an on-air light. When using with
the ARC series consoles, it is recommended to put guest microphones on the ARC-MIC-PRE
inputs. This is because the host will usually be on mic channel 1 or 2 on the ARC series
console, and will typically have their microphone channel turned on when live. Thus muting
the monitor speakers and turning the on-air light on.
Audio Level Adjustment
Both Mic 1 IN and Mic 2 IN are calibrated at the factory for typical microphone gain levels. But
it may be necessary to adjust the audio levels. To do so, there are two trimpot adjustments on
the front of the ARC-MIC-PRE. Turn clockwise to increase level, counter-clockwise to decrease
the audio level.