displayit 8' flare 조립 지침 매뉴얼 - 페이지 4

{카테고리_이름} displayit 8' flare에 대한 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. displayit 8' flare 6 페이지. 92" x 185"

8a. Run two power cables as shown by the blue

and green lines in Diagram 2.

8b. Run the main power cables through the wire

pass-through and connect to the power supply.

Plug the cables into an AC outlet to test the lights.

displayit.com

9. To help stop wire shadows on the graphic, use

the provided snap-on wire management clips.

The curtain light clips may also be used for wire

management.

10. Prop up the bottom of frame as shown in

Diagram 3. Place the Base Foot against the corner

of the bottom right of frame. Slide in two bottom

screws and hand-tighten with wing nuts.

11. Slide in two side screws and hand-tighten

with wing nuts.

Repeat steps 10-11 for second Base Foot.

800.207.0311

After-Hours Emergency: Call or Text 678.723.5343

8' (92" x 185") Flare

Assembly Instructions Page 4

Diagram 3

Flare v2.0 Updated 1/23/2018