3D Systems ProJet 4500 포스트 프로세싱 매뉴얼 - 페이지 6

{카테고리_이름} 3D Systems ProJet 4500에 대한 포스트 프로세싱 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. 3D Systems ProJet 4500 13 페이지. 3d professional printer
3D Systems ProJet 4500에 대해서도 마찬가지입니다: 빠른 참조 매뉴얼 (19 페이지)

페이지 인쇄
3D Systems ProJet 4500 포스트 프로세싱 매뉴얼

ADVANCED CLEANING

Brushing

1 .
Externally from the printer, use a stiffer nylon brushes to further clean the part surfaces as seen in Figure 4 .
•
DO NOT
the surface, result in a non-uniform color appearance and/or deteriorate the surface finish.
•
DO NOT
2.
Be very careful when brushing fine features. Brush them extremely gently with the nylon brush. Features below 3mm
thickness risk breaking when brushed, do so cautiously if you choose. Support any fine features with your fingers while
brushing .
Standard Cleaning
3D Systems, Inc.
use metal bristle brushes to clean the part . Metal brushes are too aggressive which may dull the color at
brush in the printer's cleaning station .
Brushing with Nylon Brush
Nylon Brush Cleaning
6