Acoustic Arc AS0850 사용 설명서 - 페이지 6

{카테고리_이름} Acoustic Arc AS0850에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Acoustic Arc AS0850 9 페이지. 900 mhz floating

6. Push the "Scan" button to get the best tuning reception in the speaker. When the button is pressed,

frequency tuning starts automatically and it stops when a signal is detected.

7. You should now be able to place the speaker freely in your pool, of which the speaker will be floating in the

water..

SWITCHING OFF

If there is no audio input signal to transmitter in 4 minutes, transmitter will go to standby mode and LED will

change from Blue to Green.

If the audio source is off, the LED on transmitter will change to Green.

Speaker will turn to standby mode if there is no input signal to transmitter and LED will become Green.

Speaker will automatically shut off when standby mode continues for 5 minutes.

At standby mode, speaker will turn to On automatically after getting signal from transmitter.

1. Select volume up and down on Speaker.

2. Select Light button to turn on the mood light effect in the water.

3. If you hear interference from other components, re-adjust the tuning control by moving channel knob to 1, 2

or 3 of the transmitter, then pressing "Scan" button on speaker or remote unit for best reception.