Displays2go Glass Display Case IFDC8040 조립 지침 - 페이지 2
{카테고리_이름} Displays2go Glass Display Case IFDC8040에 대한 조립 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Displays2go Glass Display Case IFDC8040 3 페이지. Double door
페이지 인쇄IFDC8040 - Glass Display Case - Double Door
2. Attach the aluminum bar (K) and 2 "L" brackets (L)
2. Attach the aluminum bar (K) and 2 "L" brackets (L)
to the top glass panel (F) with screws and washers (J).
to the top glass panel (F) with screws and washers (J).
4. Attach 1 door hinge (M) to 1 door glass panel (D),
fix the hinge at the corner. Insert the hinge collar into
the pre-drilled hole in the base.
Ver. 11/18
3. Carefully place the assembled glass panel on top of the display
3. Carefully place the assembled glass panel on top of the display
case. Secure the top panel by using screws and washers.
case. Secure the top panel by using screws and washers.
5. Insert the bottom hinge into the bottom collar, and hold another
hinge with collar at the top, then slide the door panel into the top
hinge, and tighten screws to secure the door glass in place.
Assemble the other door the same way.
Tips: Test the doors and adjust as needed.
2 of 3