Displays2go LDLECTFR1 지침
{카테고리_이름} Displays2go LDLECTFR1에 대한 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Displays2go LDLECTFR1 2 페이지.
페이지 인쇄
INSTRUCTIONS - LED Lectern Series
LDLECTCL1, LDLECTFR1, LDLECTFRG1, LDLECTCLG1
NOTE: Microphone
is sold separately
0
Acrylic counter
0
@
Audio cable
m
Remote control
Instructions for use
1. Insert the microphone into the microphone socket.
2. Plug the audio XLR connector into the corresponding port of PA system.
3. If need to connect 3.5mm/6.5mm, please select the spare 3.5/6.5mm switching cable to connect to the power amplifier
accordingly.
4. Connect the power cord to the power source.
5. FOR UNITS ORDERED WITH GRAPHICS: Slide graphic into front of unit, behind aluminum sides of the lectern. Sides will keep the graphic
in place.
Specifications
Overall Size
673x1211 (H)x381 mm(W)
e
f)
AC power cord
Microphone socket
0
Microphone
Steel base
NOTE: Units LDLECTFRG1 and LDLECTCLG1 are sold with graphic component.
Parts
Frame
LED
Microphone Socket
Weight
0
O
Aluminum frame
0
3.5 mm switching cable
Description
Counter Top
Pole
Base
Light Source
Input Voltage
Rate Current
Rated Wattage
Voltage
N.W
DISPLAYS2GO
0
Acrylic panel
@
6.5 mm switching connector
673x381 x37mm Acrylic
Extruded Alu.
673x381x6mm Steel
3535 RGB LED
100-240VAC
0.4A
20W
Phantom 48V
23kg
V21.12