Displays2go LECTFLCHW 조립 지침 - 페이지 3
{카테고리_이름} Displays2go LECTFLCHW에 대한 조립 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Displays2go LECTFLCHW 5 페이지.
페이지 인쇄
Attaching the Base to the Body
1. Position the
Base
2. Align the pre-drilled holes in the
inserts in the Base.
3. Using the provided screwdriver, attach the
Base
with (4)
Flat Head Screws
Tip: Do not fully tighten these screws until the unit is
otherwise fully assembled.
and
Body
on a clean flat surface.
Body
as illustrated in
Attaching the Reading Top
1. Position the
in
2. Align the pre-drilled holes in the
inserts in the
3. Using the provided screwdriver, attach the
to the
in
Tip: You should now fully tighten all 8 Flat Head Screws.
Figure 3
with the threaded
Body
to the
Figure
2.
Reading Top
Figure
3.
Reading
Body
with (4)
Flat Head Screws
Figure
3.
over the
Body
as illustrated
Body
with the threaded
Top.
as illustrated
Figure 2
Reading Top