Displays2go PPLNNSTSML 조립 지침 - 페이지 2
{카테고리_이름} Displays2go PPLNNSTSML에 대한 조립 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Displays2go PPLNNSTSML 2 페이지.
페이지 인쇄
ASSEMBLY INSTRUCTIONS - PPLNNSTSML
PARTS LIST
A. Leg
B. Middle Connector
C. Wood Table
D. Screw
E. Hex Key
F. Wood Screw
G. Screw Driver
A
B
C
D
X2
X1
X1
E
X2
X1
X12
F
X1
G
Step 1. Assemble (2) Legs (A) with Middle Connector
(B) by fastening (2) screws (D) from both sides. Use
Hex Key (G) provided within the package.
Step 2. Lay Wood Table (C) on a clean, smooth
surface (the side with pre-drilled holes facing up).
Place the assembled leg frame in Step 1, and align
holes on the round plate with the holes on the
bottom of the Wood Table. Insert (3) wood screws
(F) through each mounting plate. Tighten all wood
screws with provided Phillips Screw driver (G).