Displays2go PROCNTVLCR 조립 지침

{카테고리_이름} Displays2go PROCNTVLCR에 대한 조립 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Displays2go PROCNTVLCR 3 페이지. Portable counter

PROCNTVLCR Portable Counter Assembly Instructions

Remove the components from the included carrying bag. The kit should include 3 wooden

counter pieces, aluminum legs, a black fabric attachment, and one long piece of aluminum siding.

Start by attaching the legs to the wooden base; the base will be the piece with rubber feet on the

bottom. Screw the legs into the holes in the base. On each leg, you will see a piece of plastic that is

designed to support the inside shelf. You can attach the legs so this shelf is placed closer to the top or

bottom. Below you will also see a picture of the support brace which holds the legs together and keeps

the display stable.

Slide the middle shelf over the legs as shown above. There are holes in the shelf to line up with the legs.