Displays2go SCTWRCOLBK 조립 지침 - 페이지 2

{카테고리_이름} Displays2go SCTWRCOLBK에 대한 조립 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Displays2go SCTWRCOLBK 2 페이지.

Fit the bottom cabinet's base into the

case.

Place the top panel of the showcase

so the holes line up with the lights for

ventilation.

*Please Note: Repetitive insertion of light panel may cause small chips to the laminate covering of the

panel. These damages are small and are hidden once the panel is in place.

Fit the base of the showcase area

into the case.

Insert the three tempered glass

shelves. If needed, adjust height of

shelf clips with included screwdriver.

Insert light panel diagonally from

inside case*. Lower right rear corner

(side with switch) to bottom lip, then

lower left rear corner. Once both

sides are in place, lower front side

(panel opposite door). Connect wire

output from showcase to light panel

wires.

Your showcase is now complete and

ready to be filled with merchandise!