Displays2go SMTMSC8BL 조립 지침 - 페이지 2

{카테고리_이름} Displays2go SMTMSC8BL에 대한 조립 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Displays2go SMTMSC8BL 3 페이지. Tabletop market stall frame,tabletop market stall canopy 6' blue;tabletop market stall canopy 8' blue

페이지 인쇄

ASSEMBLY INSTRUCTIONS

Remove all parts from the carrying bag and lay them out on the floor. Organize your parts against the parts list.

STEP 1.

If use 8' canopy, connect Base Poles (A1+C1+B1) by using M6X16 Screws (K) and Allen Key (L). See Detail O. Connect

Cross Poles (A+C+B, D+C+E) using remaining M6X16 screws the same way.

If use 6' canopy, connect Base Poles (A1+B1) by using M6X16 Screws (K) and Allen Key (L). Connect Cross Poles (A+B,

D+E) using remaining M6X16 screws the same way.

Detail O

STEP 2.

Connect 1 Leg Post (F) to each side of the assembled base pole (A1+B1+C1) using M6X35 Screws (J) and Allen Key (L).

See Detail P. Use shorter base pole assembly (A1+B1) for 6' canopy.

Connect Base Pole (G), Front Leg Pole (H) and Rafter Pole (I) with Leg Post (F) together by using M6X35 Screws (J) and

Allen Key (L) as shown.

Repeat the step to assemble the other side frame.

Detail P

2 of 3