Displays2go DF043TLBD 사용자 설명서 - 페이지 8
{카테고리_이름} Displays2go DF043TLBD에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Displays2go DF043TLBD 19 페이지. Double-sided floor standing digital signage ir touch
페이지 인쇄Assembly
NOTE:
Two people required for safe assembly of product. Always pull out the power plug before installing or
disassembling the unit!
U N PAC K I N G
Open the top cover. Remove base from package
and carefully set aside.
ASS E M B L I N G U N I T
1
Flip base over. Insert caster posts into corresponding base
slots. Screw hex screws into the 4 screw holes for each caster.
Tighten all screws with cross screwdriver.
3
Screw antennas into antenna receivers on top of the unit.
Assembly is complete.
Have 2 people carefully remove unit from the package.
Set it down on the shipping box to avoid scratches.
2
Have one person slightly tip the unit upward. Attach base to
unit using hex screws. Tighten all the base screws with hex
wrench.
Have 2 people carefully lift into the standing position.
NOTE:
Casters can be locked for safety.
8