Displays2go IPDTBL 조립 지침 매뉴얼 - 페이지 5
{카테고리_이름} Displays2go IPDTBL에 대한 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Displays2go IPDTBL 8 페이지. Ipad stand
페이지 인쇄
8
Loosely Insert 2 screws through aligned
diametrically opposite holes. Fully tighten
1 screw using hex key provided before
removing second screw.
If you are not using cable
management for charging, please
proceed to stage 13.
9
Unlock the iPad enclosure by inserting
key into security lock and rotate
'QUARTER TURN ONLY' clockwise or
counter-clockwise through 90 degrees
which releases the locking pin. Return
key back to original position
to remove.