Displays2go LTCEIL20 설치 매뉴얼 - 페이지 2
{카테고리_이름} Displays2go LTCEIL20에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Displays2go LTCEIL20 2 페이지.
페이지 인쇄
STEP4-B
STEP5
M8
Box Wrench
Tighten or loose the screw nuts M8
Allen Key
on the head of the TV plate to adjust
the tilting function
M8 Box
Wrench
This product contains small items that could be a choking hazard if swallowed.Keep these items away from young children.
● Make Sure these instructions are read and completely understood before attempting installation.If you are unsure of any part of this installation,please contact a professional
installer for assistance.
● The wall or mounting surface must be capable of supporting the combined weight of the mount and the display,otherwise the structure must be reinforced.
● Safety gear and proper tools must be used.A minimum of two people are required for this installation.Failure to use safety gear can result in property damage,serious injury or
death.
● please check joint parts every two months,making sure the screws are loosened or not.
This product was designed to be installed on wood stud walls and solid concrete walls.Before installing, make sure the wall will support the combined load of the equipment and
hardware.Never exceed the maximum load capacity 30 KG,or else it may result in product failure or personal injury.
Note:this product is intended for indoor use only.Use of this product outdoors could lead to product failure or personal injury.
Square washer(A6)
Large hole for
M8 screws
Medium hole for
M5 and M6 screws
Small hole for
M4 screws
A5
A6
A1-A4
MIN:510mm
MAX:810mm
5x5
-2°~15°
CAUTION