Displays2go PEDLEDSV 조립 지침 - 페이지 3

{카테고리_이름} Displays2go PEDLEDSV에 대한 조립 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Displays2go PEDLEDSV 4 페이지.

1. Separate each standoff cap from its base. Use enclosed hardware and a screw

driver (not included) to secure all 4 standoff bases to the bottom of the pedestal body.

2. Attach the Base plate to fixed standoffs and align each hole with corresponding

standoff barrel. Insert standoff caps through holes and tighten by hand.

3. Move the pedestal body to its standing position. Place the Acrylic plate on top of the

pedestal body, make sure it sits inside the pedestal.