Displays2go FRMRCKWT66DS 조립 지침 - 페이지 2
{카테고리_이름} Displays2go FRMRCKWT66DS에 대한 조립 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Displays2go FRMRCKWT66DS 2 페이지. Smablcd - digital screen
페이지 인쇄ASSEMBLY INSTRUCTIONS
SMABLCD - DIGITAL SCREEN
6. Slide front panel on the bottom screws first like
in the images below. Then push front panel
towards the top and hook into place.
7. Tighten screws B through F. Next loosen screws A and C
as shown in the second image below. Screws A and C do not
need tightening.
If you have any questions regarding our products, please visit us at www.displays2go.com or contact D2G Digital
product service # 844-221-3393 .
Rev. 19.10
MASTER SKU: FRMRCKWT66DS
8. Take back panel and hook into top screws as
shown in the images below.
9. Assembled Unit.
Side note: For cord management use cable hider strips
provided with unit to run along the unit. Instructions are
provided in box of strips. Best to place one strip at a
time.
2 of 2