Displays2go SMMSD 조립 지침 - 페이지 3

{카테고리_이름} Displays2go SMMSD에 대한 조립 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Displays2go SMMSD 4 페이지. Modular slatwall

Assembly Instructions

Side bracket

Alu. connecting tube

Step 1

Assemble the base by connecting 2 side brackets with 2 Aluminum

Tubes using 16 M6x20 Hex Drive Flat Head screws as shown above.

M4x8 Phillips Low Profile

Head Screw

4 PCS

Wheel with lock

Wheel

Step 2

Carefully turn the assembled base upside down and screw in 4 wheels

at the 4 corners. Attach the Base Plate to the tabs on the base from the

bottom and fix it using 4 Low Profile Head Screws.

Alu. connecting tube

Side bracket

M6x20 Hex Drive Flat Head Screw

16 PCS

Wheel

Wheel with lock

Alu. base plate

Alu. Upright Pole

Bottom support bar

M4x16 Phillips Rounded

Head Screw

Step 3

Put the assembled base on its standing position. Insert the 2 Upright

Poles into the cutouts on the base plate, and fix them using 8 M6x20 Hex

Drive Flat Head screws.

Place the bottom support bar into the channels on the upright poles and

fix it using M4x16 Phillips Rounded Head Screws.

6 PCS

M6x20 Hex Drive Flat head Screw

8 PCS