Displays2go TSECOTSW 조립 지침 - 페이지 3

{카테고리_이름} Displays2go TSECOTSW에 대한 조립 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Displays2go TSECOTSW 5 페이지. Standing signage wall

1. Unfold the signage board and expand both ends to reach full width.

2. Attach one side panel to the end and align precut holes at the same level. Insert 1.5in screws

into top and middle holes and fix with wing nuts from the inside.

Note: Do not fix the bottom.

This step will be finished later.