Displaze D800DRv2 사용자 설명서 - 페이지 3

{카테고리_이름} Displaze D800DRv2에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Displaze D800DRv2 12 페이지.

DISPLAZE LIMITED

Description

This video card allows you to connect one LCD flat panel (TFT technology) with an analog

video output from a computer.

This interface is also fully compatible with VGA (640x400) and SVGA (800x600) modes

screens from: NEC, SANYO, SHARP, TOSHIBA and HOSIDEN...

Reduced dimensions (82 x 58 x 17 mm / 3.2 x 2.3 x 0.67 inches) and low power

consumption make easier the integration of this card inside small equipment.

Technical specifications

Graphic resolutions:

Text mode resolution:

24 bits color mode:

Fully compatible with SVGA standard (vertical refresh = 60 Hz and non–interlaced mode).

Video level adjustable by software for the three colors (RGB).

Configuration with a 3 push–buttons keyboard (Clock phase, screen width and centering image,

video level).

On screen display for configuration menus (reduced OSD functions).

Permanent storage of the configuration parameters into an EEPROM.

Automatic recall of the default parameters by a simple RESET operation.

For quantity, customer parameters could be previously loaded as default, by the

manufacturer.

Power supply:

Typical power consumption:

Optional features:

D800DRv2_D640DRv2 User Guide.doc

Revision: 2.4

D800DRv2 & D640DRv2

640 x 480 pixels (VGA), 800 x 600 pixels (SVGA) and

optionally XGA mode 1024 x 768 pixels

720 x 400 pixels

8 bits per color = 16 million colors

12 Volts only

200 mA (with no display connected).

Onboard

interface

DDC function to communicate with "Plug and Play" video

controller

User Manual

3 of 12

available

for

LVDS

Confidential

screens

Printed: 19/07/2001