Disruptive Force Axon 사용자 설명서 - 페이지 9

{카테고리_이름} Disruptive Force Axon에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Disruptive Force Axon 10 페이지.

and caution animations are playing. Thus, if you do not wish to see the animations, or

you want to perform a rep before the animations are finished, you will need to dismiss the

animations by pressing and releasing the push button once.

4.2 Using the Power Switch

Turning the power switch to the "off" position (away from the white dot on the end cap)

disconnects the battery from the rest of Axon

while Axon

is not in use. We recommend turning the power switch to the "off" position only if

you are not going to use Axon

of weeks).

Wait until Axon

is sleeping before moving the power switch to the "off" position.

When Axon

enters sleep mode, it first performs a number of "housekeeping" tasks that ensure it

functions properly upon wake up. When the power switch is moved to the "off" position while

Axon

is awake, Axon

to give Axon

an opportunity to complete its housekeeping tasks, it is best to let Axon

4.3 Charging

We recommend that you charge Axon

Axon

, turn the power switch to the "on" position (toward the white dot on the end cap), insert

the mini-USB side of the included USB cable in the port, and attach the other end of the cable to

a USB charger (e.g., a "wall wart" or your computer's USB port). When the battery is charging,

you will see an amber light illuminated inside Axon

Before we ship each Axon

sensitivity to applied forces. It is possible that you might inadvertently trigger the calibration

procedure if you accidentally press and hold down the push button while you slide the power

switch to the "on" position. You will know if you've triggered the calibration sequence, because

the display will say "Safe mode Build [xx]," and then the LEDs will light up in a rapid sequence

of red, blue, and green.

for an extended period of time (for example, more than a couple

RECOMMENDATION

does not necessarily have time to complete all of these tasks. Therefore,

and then move the switch to the "off" position.

when the battery level is below about 15%. To charge

, we perform a calibration procedure to ensure Axon

Disruptive Force LLC

1821 S. Bascom Ave. #246

Campbell, CA 95008

's circuitry to prevent the battery from discharging

sleep,

has the right