3D Systems Touch 사용자 설명서 - 페이지 7
{카테고리_이름} 3D Systems Touch에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. 3D Systems Touch 19 페이지. 3d stylus hands on design
3D Systems Touch에 대해서도 마찬가지입니다: 사용자 설명서 (17 페이지)
페이지 인쇄
CONNECT THE TOUCH
1.
By grabbing the body of the device with both hands, carefully remove the
2.
Position the Touch device in your workspace, using both hands to grasp the body or base of the device.
NOTE: See
"Handling the Touch Device" on page 12
damage.
3.
First, plug the
power cord
power cord
4.
Plug the
into an available
status light on the power supply indicates that it is working correctly.
3D Systems, Inc.
for instructions on how to handle the device to reduce the risk of
into the
power
supply.
outlet
(for 110V the outlet must be rated for at least 2 Amps, for 220V: 1 Amp). The green
Touch
and
cables
7
from the box.