Acoustic Energy AE1082 소유자 매뉴얼 - 페이지 7

{카테고리_이름} Acoustic Energy AE1082에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Acoustic Energy AE1082 10 페이지.

Connections

Check that both your amplifier and subwoofer are switched off before connection.

Failure to do so may result in damage to your amplifier or subwoofer. It is

sometimes recommended that over-long low cost cables are used initially to

facilitate experimentation with the positioning, and only then purchase and install

using the final cable choice.

For use with amplifiers having a subwoofer output jack

Connect from the dedicated subwoofer line output on the amplifier to the line

input(s) on the AE108² (a single lead to either input or a 'Y' connector to both inputs

may be used).

For use with amplifiers having Line Level pre-amp jacks

The pre-amp outputs of your amplifier can be connected to the line-level inputs on

the AE108². The line level outputs on the AE108² are then connected back to the

power amp (main) inputs on your amplifier.

Using two AE108² subwoofers

When using two AE108² subwoofers use the Line Level output connectors from the

main subwoofer to the Line Level input connectors on the second subwoofer.