Acoustic Energy Aelite Sub 소유자 매뉴얼 - 페이지 3

{카테고리_이름} Acoustic Energy Aelite Sub에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Acoustic Energy Aelite Sub 8 페이지. Active subwoofer loudspeaker

페이지 인쇄

FRONT PANEL

1. Crossover frequency knob

Adjusts the balance at the crossover point between the bass

(low frequencies) from the AELITE Sub and the treble (high frequencies)

continuing to the main stereo front speakers.

2. Sub level volume control knob

Adjusts the volume level output of the

subwoofer, allowing you to balance the

volume of the AELITE Sub to blend in

with your main stereo speakers.

Turning the knob clockwise increases

the volume level, and turning the knob

counter clockwise decreases the level.

3. Infrared sensor

The sensor must be kept clear to

ensure proper working of the remote

control.

BACK PANEL

4. Power switch

Switches the power ON and OFF. By switching to AUTO the power is

automatically switched ON when a signal is applied to an input.

5. Power indicator light

This indicator lights green when the power is switched ON, and lights red

when in STANDBY mode.

6. Power cord socket

Connect the cord supplied to a 110-120V or 220-240V AC main power

outlets.

7. Phase switch

The normal setting for the phase is the 0º position. Switching to 180º will

change the subwoofer phase and vary the tonal quality of the bass, which is

also dependant on the location of the AESPRIT Sub relative to your main

stereo speakers

8. Line in jacks (RCA-type pin-plug)

Used to connect the subwoofer to the PRE-OUT jacks of the amplifier.

9. Line out jacks (RCA-type pin-plug)

Used to connect

back to the power

amp inputs on

your amplifier.

10. From

amplifier-Hi-

level speaker in

terminals

Used to connect

the FRONT

SPEAKER terminals

of the amplifier to

this unit.

11. To speaker-Hi-

level speaker

out terminals

Used to connect

the front speakers

with this unit, via

the 75 Hz 1st-

order crossover.

Operation

ACO

USTIC ENERGY

200W ACTIVE SUBWOOFER