CAMDEN CX-WC16PS Series 설치 지침 매뉴얼 - 페이지 5

{카테고리_이름} CAMDEN CX-WC16PS Series에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CAMDEN CX-WC16PS Series 13 페이지.

WC16PS SERIES RESTROOM CONTROL

I NSTA LLAT I O N I N S T RU C T I O N S

DOUBLE GANG ELECTRICAL BOX MOUNT - CM-331/42SW-SGLR - CM-325/42SW

1. a) If using an in-wall box ensure the box is plumb and

square, and flush with the wall surface.

b) If using a surface box, ensure it is secure & plumb.

c) If using a 4 x 4 box, ensure the box is plumb and square,

and flush with the wall surface, then attach the metal

adaptor plate (included in the packages) to the box using

appropriate fasteners.

2. Bring your 4 or 6-conductor wire through the back or side

of the enclosure and leave approximately 6" tail for

wiring connection.

3. Make the electrical connections to the device according

to the wiring section.

Page 5 of 13

CM-331/42SW-SGLR & CM-325/42SW Flush Mount

CM-331/42S-SGLR Label

Note:

CM-325/42SW Does not

come with a Label

CM-331/42SW-SGLR

CM-325/42SW Faceplate

4. Using the dip switch located on the end of the unit, set the

operating mode.

5. Attach the unit to the enclosure using the two #6-32

screws provided.

6. Apply power and adjust range and time delay via the

potentiometers on the front of the unit.

7. Attach the faceplate to the unit using the two black

#6-32 x 1/2'' machine screws or tamperproof screws.

NOTE: Do not overtighten!

8. Apply the label as required

(only for the CM-331/42SW-SGLR).

Wall

Adapter Plate

5502 Timberlea Blvd.

L4W 2T7

Mississauga, ON Canada

Tel: (905) 366-3377

www.camdencontrols.com

A.OLISA MAR-20

Double Gang Surewave

mounting Exploded