3D Upfitters Carbon Air Filter 설치 매뉴얼 - 페이지 3

{카테고리_이름} 3D Upfitters Carbon Air Filter에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. 3D Upfitters Carbon Air Filter 12 페이지. Air filter & vents

Carbon Air Filter

Locate Mounting Point

If you've purchased an enclosure kit from 3DUpﬁtters the mounting point will be on the

back panel when viewed from the back, as shown below.

If you're already got an enclosure or are creating one for yourself, you'll need to cut a

hole for air ﬂow, and four holes to mount the ﬁlter and fan. The hole should be 78mm

in diameter, and the holes are 70mm apart in a square pattern. There is a DXF ﬁle you

can download from the product page on the website if you want to laser or CNC your