3D Upfitters External Ventilation Kit 설치 매뉴얼 - 페이지 9

{카테고리_이름} 3D Upfitters External Ventilation Kit에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. 3D Upfitters External Ventilation Kit 12 페이지. Air filter & vents

페이지 인쇄

DIY/Miscellaneous Vent Adapters

3DUPﬁtters has a wide variety of vents designed to meet your custom venting needs. They

are

designed to work with standard 3" or 4" clothes dryer hose available in any hardware store.

Adjust the hose clamp to be right next to the ridge for the best ﬁt.

The adapters are intended to be ﬂexible so you can design a conﬁguration that's best for your

situation. Here's an example setup with the CR-10/Taz6/Ender 5 Plus vent kit. For this you'd

need to order a hose, clamps, and dryer window vent from your hardware store.

The Prusa/Ender setup is a bit more complicated since window inserts are all 4", while the

hose we recommend is 3". This setup adds an 3"->4" hose adapter, and the 3" hose is small

and doesn't overwhelm the small enclosure. Note that with this setup you need 2 3" clamps

and 1 4" clamp.