3D3 MINI A1122 사용자 설명서 - 페이지 3

{카테고리_이름} 3D3 MINI A1122에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. 3D3 MINI A1122 8 페이지. Universal 3d tv eyewear

prepare for installation

Ensure that only the TV you wish to use with the

3D3 Eyewear is switched on.

Set the TV to 3D mode (refer to the TV operating

instructions).

Stand less than 1 metre from the TV.

installation

With the 3D eyewear switched off, press and hold the

function button for five seconds. The indicator light

will flash until the 3D signal is detected and then

extinguish. You should now be viewing 3D images.

If the 3D signal has not been detected, check that

there is nothing blocking the signal from the TV to

the eyewear and repeat the process.

charging

When the battery is low, the blue indicator light will

flash for approximately five seconds when switching

on. Connect the supplied cable to the charging port

and the other end to any suitable USB charger or port

on a TV, laptop or desktop computer. The indicator

light will illuminate red until fully charged and then

extinguish.