3dBanRC BanRC2 사용자 설명서 - 페이지 5

{카테고리_이름} 3dBanRC BanRC2에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. 3dBanRC BanRC2 16 페이지.

STL files

Files are designed for an easy use with printers available in market and all type of slicers.

Important is to use the same setting shown in slicer tables.

You can print the

STL files

Before you buy, you can test your printer on the biggest part wing part1 STL file.

Download

Test STL

G.Code files:

You can download them on your SD card for directly use them on your printer. Using these

files are on your own risk of your printer safety. OR you can generate your own G.Codes files

using the STL files for being sure that they will be applicable for your printer.

Option

Download the G.Codes on SD card, insert the SD card in your printer. Heat end set to 200

210

C and bed temperature set to 60

screen. Enjoy the printing.

G.Code

files

Option 2:

Slice the STL file, save the G.Code on SD card, insert the SD card in printer. Enjoy the printing.

STL Files

individually or in groups, individually is recommended.

file.

C. You can change the speed and temperature on printer

G.Code

file

Or another

slicer

C -