CAME A 3024 N 설치 매뉴얼 - 페이지 3
{카테고리_이름} CAME A 3024 N에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CAME A 3024 N 13 페이지. Ati series
CAME A 3024 N에 대해서도 마찬가지입니다: 설치 매뉴얼 (13 페이지)
페이지 인쇄
4.4 Overall dimensions
Measurements in mm
5 Installation
Installation must be carried out by expert qualified personnel and in full compliance with current regulations.
5.1 Preliminary checks
Before installing, do the following:
• Make sure the structure of the gate is sturdy, the hinges work and that the is no friction between moving and non-moving parts;
• That measurement C is not greater than the value shown in Tab. 3, p. 4. In this case you need to work on the pillar until said measu-
rement is obtained;
• Make sure the path of the electrical cables complies with the command and safety instructions;
• That there is a (soundly secured to the ground) mechanical stop to prevent the gate leaf/gearmotor from over extending.
•
Make sure that any connections inside the case (that provide continuance to the protective circuit) be fitted with extra insula-
tion as compared to the other conductive parts inside;
• Make sure you have suitable tubing and conduits for the electrical cables to pass through and be protected against mechanical
damage.
A 3024N
Travel
A 5024N
Travel
Pillar
Hinge
Gate leaf width
Gate leaf weight
m
2.00
2.50
3.00
Gate leaf width
Gate leaf weight
m
2.00
2.50
3.00
4.00
5.00
End stop
Gate leaf
kg
800
600
400
kg
1000
800
600
500
400
3