CAME AX3024 설치 매뉴얼 - 페이지 8
{카테고리_이름} CAME AX3024에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CAME AX3024 16 페이지. Operator for swing gates
CAME AX3024에 대해서도 마찬가지입니다: 설치 매뉴얼 (16 페이지)
페이지 인쇄
Weld the gate bracket to the gate leaf making sure the quotas shown in the table are met.
Note: for AX5024 gearmotors, require an additional 10 mm shim between the gate and the bracket.
Note: on non-metal gate leaves assemble and weld the two parts of the bracket and secure them with proper screws.
Secure the tail joint to the bracket.
Insert the bushing (lubricated) into the pillar bracket's hole. The bracket has holes that allow the opening angle to be changed. Secure
the tail joint to the bracket.
AX3024
AX5024
1
Bushing
Bushing
2
Screw M8 x 35
Tail joint
Nut UNI 7474 M8
Tail joint