CAME F7024N 설치 매뉴얼 - 페이지 8

{카테고리_이름} CAME F7024N에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CAME F7024N 17 페이지. Operator for swing gates
CAME F7024N에 대해서도 마찬가지입니다: 설치 매뉴얼 (17 페이지), 설치 매뉴얼 (16 페이지)

페이지 인쇄

Fit the gearmotor into the post-mounted bracket; match the four holes and fasten it using the two issued M8x90 screws and M8

nuts (4).

(4)

5.7 Applying the articulated arm

- Fit and fasten the straight arm in to the gearmotor shaft using a plug, bolt and accompanying distancer.

Lubricate the bushing, ﬁ t it onto the straight arm and join it with the curved arm by way of the supplied bolt, washers and nut.

Release the gearmotor and fasten the curved arm to bracket A using the supplied nut. Lubricate it and check that it moves

freely.

www.metalines.com

M8x90

Distancer

M10x14

M12x40

M12

M12x55

Locking ring

Bracket A

[email protected]