CAME FROG-PM4 설치 매뉴얼 - 페이지 7

{카테고리_이름} CAME FROG-PM4에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CAME FROG-PM4 17 페이지. Swing-gate operator
CAME FROG-PM4에 대해서도 마찬가지입니다: 설치 매뉴얼 (19 페이지), 설치 매뉴얼 (13 페이지), 사용 설명서 (12 페이지)

페이지 인쇄

Laying the corrugated pipes and inspection chambers

Make the hole for the box.

Prepare the junction boxes and corrugated pipes necessary for connection to the inspection chamber and the drain pipe.



the number of tubes depends on the type of system installed and any accessories.

Installing the foundation box

Lean the box against the pillar making sure that the corrugated pipes and the drain pipe pass through the designated holes.

Fill the hole with concrete.

Position the box level with the ground and place the pin in line with the upper gate hinge. Leave to solidify for at least 24 hours.

Clean any remaining concrete from inside the box.

24h