CAME PRATICO SYSTEM BX Series 설치 매뉴얼 - 페이지 15

{카테고리_이름} CAME PRATICO SYSTEM BX Series에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CAME PRATICO SYSTEM BX Series 19 페이지. Automation for sliding gates

8.2 Battery connection and memorization of the code on the control board

1) Insert the terminal (-, +)

connected to the battery

to the free coupling of the

motherboard.

Note: the board must be battery-

powered for saving procedures.

Check the LED signalling 230V

power is off.

Battery bracket

2) Keep the key (ref. point 19, page 8) on the basic board

depressed. The signalling LED (ref, point 18, page 8)

ﬂ ashes (intermittent LED).

3) Press a key (the same one memorized for ope-

ning the gate) on the transmitter to send the code.

The LED will remain lighted to signal successful

memorization.

N.B.: if the code needs to be changed, repeat the

sequence described above.

Transformer

Electric lock

12V - 1.2 Ah

emergency batteries

Led 230V power-supply signal

Save button of the radio-code

of the "pratico system"

Lit LED

Terminal -, +

AF2

Flashing LED