CAME AGT A200K 설치 매뉴얼 - 페이지 6
{카테고리_이름} CAME AGT A200K에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CAME AGT A200K 12 페이지.
페이지 인쇄
HA/200
Description
Audio module.
Functions of terminals and audio adjusters
Terminal board
5 –
power supply
21 + 12 VDC
8
common call (for call beep)
11 audio to internal receiver
12 audio from internal receiver
14 enable
In systems in which there is an enable command, terminal
14 can be connected to the earth (unit always active) or to
terminal 12 (unit active only when handset is raised).
Ⓐ
Ⓑ
Installation
The device can be installed on DIN rails (EN 50022) on a
•
suitable switchboard, or on the wall using the terminal covers.
To dismantle the device, proceed as shown in fi gure 2-3.
•
See fi gure 1 for dimensions.
•
The power supply must always be installed horizontally.
Ensure there is correct ventilation if the power supply is
installed in a metal case.
Trimmers
Ⓐ Speaker audio
Ⓑ Microphone audio
Technical data
Type
Power supply (VDC)
Max power consumption (mA)
Power consumption in stand-by (mA)
Storage temperature (°C)
Operating temperature (°C)
IP Rating
HA/200
12
50
<35
-25 to +70
-15 to +50
IP54