Aerisa 8100 설치, 운영 및 유지보수 매뉴얼 - 페이지 3

{카테고리_이름} Aerisa 8100에 대한 설치, 운영 및 유지보수 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Aerisa 8100 4 페이지.

ELECTRICAL INSTALLATION INSTRUCTIONS

1. Connect the 24 VAC power input wiring to the terminal block labeled "24 VAC Terminals" on the

Aerisa model 8000.

2. Wire the BAS monitoring cable to the factory supplied banana plug (BAS dry contacts). Plug the

banana plug into the jack on the Aerisa model 8000 where labeled "BAS Controls".

3. Turn the power switch to the ON position. The green indicator light will illuminate indicating proper

function and the normally open dry contacts will close allowing monitoring signal to return to the BAS.

Aerisa

1214 W. Boston Post Road, Suite 410, Mamaroneck, NY 10543

Tel: 480-302-6300