3DHobbyShop.com Yak 54 조립 설명서

{카테고리_이름} 3DHobbyShop.com Yak 54에 대한 조립 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. 3DHobbyShop.com Yak 54 18 페이지. 55” arf rc aircraft

3DHobbyShop.com

Yak 54 55" Assembly Manual

Thank you for purchasing this 3DHobbyShop ARF RC aircraft. If you have any issues, questions,

concerns or problems during assembly, please contact our tech department at:

or 1-830-990-6978 10am-5pm Central M-F

SAFETY in Assembly

During assembly of this aircraft, you will be asked to use sharp knives and hobby adhesives. Please

follow all safety procedures recommended by the manufacturers of the products you use, and always

follow these important guidelines:

ALWAYS protect your eyes when working with adhesives, knives, or tools, especially power tools. Safety

glasses are the best way to protect your eyes.

ALWAYS protect your body, especially your hands and fingers when using adhesives, knives, or tools,

especially power tools. Do not cut toward exposed skin with hobby knives. Do not place hobby knives on

tables or benches where they can roll off or be knocked off.

ALWAYS have a first-aid kit handy when working with adhesives, knives, or tools, especially power tools.

ALWAYS keep hobby equipment and supplies out of the reach of children.

SAFETY in Flying

ALWAYS fly your aircraft in a safe area, away from spectators.

ALWAYS fly your aircraft in a safe manner, within your control.

NEVER fly too close to yourself.

ALWAYS wear eye protection while operating your model aircraft.

ALWAYS keep your hands and body clear of propellers.

ALWAYS observe lipoly battery safety procedures.

REQUIRED ITEMS

Thin CA Glue

Medium CA Glue

Hobby Knife

Small Phillips Screwdriver

Set Metric Allen Wrenches

Scissors

Small Pliers

Clear Tape

Wire Cutters

Paper towels

1/16 inch drill bit

Epoxy glue (optional)