CAME F1000 설치 매뉴얼 - 페이지 5

{카테고리_이름} CAME F1000에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CAME F1000 15 페이지. External automation system with articulated arms for hinged gates
CAME F1000에 대해서도 마찬가지입니다: 표준 설치 (16 페이지), Manaul (16 페이지), 표준 설치 (12 페이지)

페이지 인쇄

1. Installation

4.3 Description of parts

1) Base plate

2) Gearmotor assembly

3) Motor cover

4) Articulated transmission arm

Optional accessory :

F1001 Straight telescopic arm (for single

gate wings that are 0,5 to 2 m max long).

4.4 Overall dimensions

5 Installation

Installation must be carried out by expert qualified personnel and in full compliance with current regulations.

5.1 Preliminary checks

Before installing, do the following:

• Make sure the structure of the gate is sturdy, the hinges work and that the is no friction between moving and non-moving parts;

• Make sure the path of the electrical cables complies with the command and safety instructions;

• That there is a (soundly secured to the ground) mechanical stop to prevent the gate leaf/gearmotor from over extending

•

You may perform internal back up circuit connections, provided you use additional insulation when compared to the other

internal live parts;

• Make sure you have suitable tubing and conduits for the electrical cables to pass through and be protected against mechanical

damage.

Pillar

450

Hinge

340

End stop

Gate leaf

If distance B is 0 to 300 mm, distance A must

be at least 110 mm.

If distance B is 300 to 380 mm, distance A must

be at least 150 mm.

182