Acoustic Research AWSBT7 설치 및 운영 매뉴얼 - 페이지 4
{카테고리_이름} Acoustic Research AWSBT7에 대한 설치 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Acoustic Research AWSBT7 6 페이지. Portable wireless speaker
페이지 인쇄
Setting Up Bluetooth Wireless
Streaming Audio With Bluetooth
Once you've paired and connected your device with the speaker, you can control music
playback from the palm of your hand. Select your music, stop it, change songs and playlists,
all right from your device's screen.
To adjust volume: Press the Volume +/– buttons on back of the speaker.
To disconnect from the speaker: Either turn Bluetooth off on your device or choose
"Disconnect" from the list of options in your device's Bluetooth settings.
To reconnect with the speaker: Just turn the speaker on and wait a few seconds for the
speaker to fi nd and connect to your device. If the speaker still hasn't found your device (which
may happen if, for instance, another device has been connected after yours) make sure the
speaker isn't connected to another device currently. Then select the AR SPEAKER from the
list of Bluetooth connections available in your device's Bluetooth menu to connect to it.
Using the Auxiliary Audio Input
Making a Direct Connection
Turning the Speaker Off
1. Press the On-Off on the back of the speaker to turn the speaker off.
2. Confi rm that the speaker is off by verifying that the indicator light on the speaker's back
panel is no longer illuminated.
1. Connect one end of the provided 3.5mm audio in
cable to the Audio Input jack on the back of the
speaker.
2. Connect the other end of the cable to the headphone
output on your MP3 player or other portable audio
device.
3. If the speaker isn't already on, press the On-Off button
to turn it on.
Warning:
This product is designed to work with
line level outputs or headphone outputs only.
NOT
connect it directly to speaker outputs as it will
permanently damage the speaker.
Troublesho
The following troubleshooting gui
associated with the installation an
please call toll-free at 1-800-732-6
Issue:
No sound
Cannot pair
the speaker
with your
Bluetooth
device
DO
Specifi catio
Speaker
• Bluetooth® wireless technology: Bl
• 2-way acoustic design: 10 Watt rate
• Audio output power: 7 Watt RMS (M
• Audio line-in
• Distortion : 1%
• S/N Ratio : 65dB (typical)
• Operation distance : Up to 10 meter
• Frequency response: 20Hz - 20kHz
• Operates using supplied AC adapte
*Maximum range; results may vary ac
Cause and sol
• Check that the A
cord from the AC
or
• If you're using ba
correct polarity (
• Confi rm that the
• Check that the au
transmitting soun
• Make sure the vo
• Check that the sp
• Move the Bluetoo
technology gener
vary based on oth
etc.
• Make sure you ha
audio with Blueto
• Make sure you en
• Make sure the Blu
• Move the Bluetoo
technology gener
vary based on oth
etc.
• Make sure your d
• Turn off all other