Aerix TURBO-X 매뉴얼 - 페이지 7
{카테고리_이름} Aerix TURBO-X에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Aerix TURBO-X 12 페이지.
페이지 인쇄
Trim Backward
Drift Forward
Drift Backward
Trim Forward
Drift Right
Trim Left
Drift Left
Trim Right
When you first take off you should attempt to level the TURBO-X into a hover.
Begin with the drone in front of you with the bow of the drone facing forward.
Take off and begin to maintain a steady height around 3 feet off the ground.
If the TURBO-X drifts in any one direction you can use the Trimmer Tabs to
make precision adjustments to the motors in order to keep the drone centered.
For Example: If the TURBO-X drifts toward you (reverse) press Trimmer A UP
one click at a time until it stays steady, if it drifts away (forward) press DOWN.
Each click is one adjustment, you can click in the opposite direction until you
hear a LONG BEEP, that indicates you are back at the center setting.
The same is true if it drifts Left, you would press Trimmer B RIGHT and if it
drifts Right, you would adjust the Trim LEFT until it stays centered.
This is important if you want to have precision flight with takeoff and landing.
If you just want to fly around and have fun, it may not matter if it drifts a little.