Altman Phoenix Series 작동, 프로그래밍 및 안전 매뉴얼 - 페이지 7
{카테고리_이름} Altman Phoenix Series에 대한 작동, 프로그래밍 및 안전 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Altman Phoenix Series 12 페이지. Ellipsoidal spotlight
Altman Phoenix Series에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (4 페이지)
페이지 인쇄
Operation Menu and Options
DMX Control
-DMX Address (1-512)
-DMX Resolution (8 Bit or 16 Bit)
-Master Channel (Off or On)
-Smoothing (Off or On)
-DMX Loss (Off, Hold Last Command, Preset)
To address your fixture follow these steps:
1-Power the fixture and wait for the startup to complete. The screen will turn off.
2-Press ENTER and you will see "DMX Control" press ENTER again.
3-When the screen shows "DMXAdr 1" press ENTER again. The up and down arrows should now
be next to address 1. (See image 2 below)
4-Press the UP or DOWN buttons to scroll to your desired DMX address.
5-Press ENTER to confirm the address.
6-Press MENU to back out of the DMX address setting.
The table below demonstrates the DMX Control Options you can choose from. By following the
same steps to address your fixture you can choose any of the following options from below.
Menu Category
Control Type
DMX Address
DMX Resolution
Master Channel
DMX Control
Smoothing
DMX Loss
Altman Lighting, Inc.
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE. COPYRIGHT 2012© ALTMAN LIGHTING, INC/ ALL RIGHTS RESERVED
Option 1
Option 2
1 to 512
8 Bit
16 Bit
Off
On
Off
On
off
Hold Last Look
Preset (cue 1)
57 Alexander Street., Yonkers, NY 10701
1/24/14 rev:C
7
The up and
down arrows
must be next to
the number in
order to scroll to
your desired
DMX address.
Option 3
Factory Default
001
8 Bit
Off
On
Off
1-800-4-ALTMAN