CAME BPT MTMA/GSM 프로그래밍 매뉴얼 - 페이지 12
{카테고리_이름} CAME BPT MTMA/GSM에 대한 프로그래밍 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CAME BPT MTMA/GSM 16 페이지. Audio gsm module for modular plate
페이지 인쇄20. Setting up the message tones
Code
A
6 1
.
Key press tone
A - Enter 1 or 0 in this field (pre-set
1 = Key press tone enabled.
0 = Key press tone not enabled.
B - Sets whether activation of the solenoid lock must be accompanied by an acoustic signal. B - Enter 1 or 0 in this field (pre-set
).
1
1 = Activation tone enabled.
0 = Activation tone not enabled.
C - Sets whether entering a correct/incorrect activation code must be accompanied by an acoustic signal. B - Enter 1 or 0 in this
field (pre-set
).
1
1 = Confirmation/error tone enabled.
0 = Confirmation/error tone not enabled.
D - Sets whether to activate voice messages audible even by the hearing-impaired from module MTMBFVS (pre-set
1 = Voice messages enabled.
0 = Voice messages not enabled.
Note: the fields left empty do not cause any change to existing programming.
21. Requesting the GSM signal strength of the module
Note: The command does not require parameters.
Code
8 0
? #
The reply message gives the signal strength detected in the following form:
Text of reply message
[ __ __ __ __ ]
[ +_ __ __ __ ]
[ ++ __ __ __ ]
[ ++ +_ __ __ ]
[ ++ ++ __ __ ]
[ ++ ++ +_ __ ]
[ ++ ++ ++ __ ]
[ ++ ++ ++ +_ ]
[ ++ ++ ++ ++ ]
22. Requesting the module to be called back
Note: The command does not require parameters.
Code
8 1
#
Following correct sending of the message, the module makes a call to the number that sent the SMS.
B
.
Solenoid lock tone
).
1
Signal strength detected (dBm)
Unknown or not detectable
< -103 (poor quality of outgoing calls)
from -103 to -94 (poor quality of outgoing calls)
from -93 to -90
from -89 to -84
from -83 to -80
from -79 to -74
from -73 to -62
from -61 to -53
C
.
Messages tone
D
.
Voice messages
).
1
#