3DLabPrint Printed Racers Street Kart 사용자 설명서 - 페이지 4
{카테고리_이름} 3DLabPrint Printed Racers Street Kart에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. 3DLabPrint Printed Racers Street Kart 12 페이지. 1/15 scale vehicle
Street kart assembly
7.
Secure upper plate, servo and seat
to lower plate with M1.6x3mm,
M1.6x4mm
and
M1.6x6mm
screws.
8.
Secure spindles from above with
M1.6x4mm
screws. Spindle horns
should be on the bottom position.
Spindles has to move freely but
without any wobble. Use grease
for more smooth movement.
STREET KART user manual
Street kart assembly
9.
Secure spindles from below with
M1.6x4mm
screws. Connect spindles
and steering links with
M1.6x4mm
screws. Spindles has to move
freely but without any wobble.
Use grease for more smooth
movement.
10.
Glue brake discs to the spindles with
CA glue. Use activator if necessary.
I
printed_racers
6