Acoustic Research AW-D510 소유자 매뉴얼 - 페이지 8

{카테고리_이름} Acoustic Research AW-D510에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Acoustic Research AW-D510 12 페이지. 2.4ghz digital wireless hd headphones

Using your Headphones

4. The headphones and transmitter should automatically lock onto each other for

wireless transmission.

If they don't tune automatically, or if you experience interference in the

transmission, press the ch select button on the top of the transmitter until you

find the clearest channel. The headphones beep when they lock onto a new

channel. If you don't hear a beep, the current channe might be in use by other

2.4GHz devices (such as a wireless router). Push the ch select button again to try

another channel. There are 8 channel frequencies available.

5. Adjust the volume using the volume up and down buttons on the left earphone.

Turning the Headphones Off

To turn the headphones off: Press and hold the power button on the headphones

for 1 second. Don't forget to switch off the transmitter too!

1. Press the power button on the transmitter's top

panel to turn the transmitter on.

Note: Make sure the right input is selected—if it isn't,

press the input select button repeatedly until the LED

above the correct input is lit.

2. Press the power button on the right headphone to

power

turn the headphones on.

button

3. Switch on the audio source (TV, DVD, CD player,

etc.) to which the transmitter is connected. If your

audio source is a DVD or CD player, start a disc.