Alto ELVIS MKII 소유자 매뉴얼 - 페이지 4

{카테고리_이름} Alto ELVIS MKII에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Alto ELVIS MKII 17 페이지. Elvis mkii speaker enclosures active models
Alto ELVIS MKII에 대해서도 마찬가지입니다: 소유자 매뉴얼 (14 페이지), 서비스 매뉴얼 (17 페이지)

페이지 인쇄

HOOK

2. QUICK START - ACTIVE SPEAKER CABINETS

Active, Full-range, two speakers. It is similar to the passive example but you

do not need a power amplifier in between the mixer and the 2 ELVIS MKII

speakers Make all initial connections with all the equipments powered off, and

ensure that all the main volume controls are turned down completely.

1). Connect one side of the signal cable at your mixer into the Main Output

Left/ Right (with 1/4"Jack or XLR) and the other side of the cable in to the Line

Input (COMBO) of your ELVIS MKII active speaker cabinet (with1/4"Jack or XLR).

2). Connect the power cord to mains.

3). Turn ON your mixer first, then the ELVIS MKII cabinets.

4). Turn up the volume control of the ELVIS MKII cabinets.

5). Use PFL function to get the proper input level for the mixer, and adjust the

Main Mix Level control to reach the desired output level.

6). After use, turn off your active speaker cabinets first, then the mixer.

LINE IN

MAIN OUT L

MAIN OUT R

MIXER