Alto ELVIS15 SA 사용자 설명서 - 페이지 7
{카테고리_이름} Alto ELVIS15 SA에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Alto ELVIS15 SA 7 페이지. Elvis series passive full-range speakers
Alto ELVIS15 SA에 대해서도 마찬가지입니다: 사용자 설명서 (14 페이지), 사용자 설명서 (14 페이지)
페이지 인쇄
-. For Active Subwoofer & Satellite Speakers
1). Connect one side of signal cable at your audio mixer in to Output Left /Right (with Stereo-Jack or XLR) and the other
side of the cable in to the Left / Mono Input (COMBO) of the active subwoofer; with the second signal cable connect
the Left Output of the subwoofer (Stereo/Mono-Jack or XLR) to the Line Input (COMBO) of the active satellite (with
Stereo - Jack or XLR).
2). Connect the power cord to mains.
3). Turn on your mixer first, then the active speaker cabinets.
4). Turn up the volume control fo the active speaker cabinets.
5). Use PFL function to get the proper input level for the mixer, and adjust the Main Mix Level control to manipulate the
output level.
6). After using, turn off your active speaker cabinets first, then the mixer.
QUICK START
Elvis Active Subwoofer & Satellite Speakers
Power Cord
Tripod
Mount
Signal Cable
Tripod
Mount
Signal Cable
Left
Right
Main Mix
Main Mix
Output
Output
6
3. CONNECTION PLATE
- PASSIVE FULL-RANGE Speaker for ELVIS10 / ELVIS12 / ELVIS15 / ELVIS12M
(1) INPUT: Receive the power coming from an external power amplifier (SPK +1/-1 connected; +2/-2 not connected).
(2) THRU: Direct LINK for connect in parallel a second speaker cabinet (SPK +1/-1 connected; +2/-2 not connected).
SOUND REINFORCEMENT SPEAKER SYSTEM
- PASSIVE SUBWOOFER Speaker for ELVIS12S / ELVIS15S
(1) INPUT: Riceive the power coming from an external amplifier (SPK +1/-1 connected;+2/-2 not connected).
(2) OUTPUT: Power output for satellite speaker, under passive crossover filtered at 125Hz (SPK +1/-1 connected;
+2/-2 not connected).
R
LTO
ELVIS 12
Power Handling:
AES - 180 Watts
PEAK - 360 Watts
IMPEDANCE:
8 ohms nominal
MODEL
SERIAL
DESIGNED AND DEVELOPMENT IN ITALY
INPUT
THRU
LINK
(1)
(2)
R
LTO
ELVIS 12S
POWER HANDLING:
AES - 200 Watts
PEAK - 400 Watts
IMPEDANCE:
4 ohms nominal
MODEL
SERIAL
DESIGNED AND DEVELOPMENT IN ITALY
INPUT
OUTPUT
(1)
(2)
7